RUBBERALL® GEOTEXTILE MAT SPECIFICATIONS DATA SHEET
DESCRIPTION:
Water Tight Technologies® RUBBERALL® Geotextile Mat is a polypropylene, staple fiber, needlepunched nonwoven geotextile. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is resistant to ultraviolet degradation and to biological and chemical environments normally found in soil.
SUGGESTED USES:
RUBBERALL® Geotextile Mat should be used as a protective underlayment for the .045 RUBBERALL® Membrane when used for pond lining.
Nominal Weight |
8 ounces |
Color |
Black |
Widths (ft.) |
15’ |
Lengths (ft.) |
300’ |
Property |
Test Method |
|
Mechanical: |
Grab Tensile Strength |
ASTM-D-4632 |
205 lbs. |
Grab Elongation |
ASTM-D-4632 |
50% |
Puncture Strength |
ASTM-D-4833 |
110 lbs. |
Mullen Burst |
ASTM-D-3786 |
350 psi |
Trapezoidal Tear |
ASTM-D-4533 |
85 lbs. |
Wide Width Tensile |
ASTM-D-4595 |
75 lb – in. |
Endurance: |
UV Resistance |
ASTM-D-4355 |
70% |
Hydraulic: |
Apparent Opening Size |
ASTM-D-4751 |
80 US Std. Sieve |
Permitivity |
ASTM-D-4491 |
1.50 sec-1 |
Permability |
ASTM-D-4491 |
0.38 cm /sec. |
Water Flow Rate |
ASTM-D-4491 |
110 gpm/ft2 |
Note 1: The above listed physical properties are effective 9/6/00 and are subject to change without notice.
Note 2: Values shown are in weaker principal direction. Minimum average roll values are calculated as the typical minus two standard deviations. Statistically, it yields a 97.7% degree of confidence that any samples taken from quality assurance testing will exceed the value reported. |
|
