RUBBERALL® TERMINATION BAR DATA SHEET

DESCRIPTION:

RUBBERALL® Termination Bar is intended for attaching and sealing flashing termination as outlined in the RUBBERALL® Installation Manual.

APPLICATION:

Substrates must be free from dust, dirt, oil, water and other contaminants. Wall areas above Termination Bar must be waterproof. Apply RUBBERALL® Water Cut-Off Mastic between the substrate and flashing directly under where the Termination Bar is to be installed. Anchor bar through each pre-punched hole. Remove excess flashing material above termination bar.

TYPICAL PHYSICAL PROPERTIES:

Material:

6063 — T6 Aluminum

Length:

10 ft., 5 ft.

Height:

1.0 in. +/- .012"

Thickness:

.187 in.

Holes:

.25 in. on 6 in. center

STORAGE:

Store in unopened original containers protected from the weather.