See Printer-Friendly Version
Download PDF File

SECTION 1 - PRODUCT IDENTIFICATION

Product Name:
Uncured EPDM Flashing Membrane

24-Hour Emergency Telephone Number:
800-424-9300 CHEMTREC

Chemical Name/Synonyms:
6, 12 and 18 inch Uncured Flashing

Manufacturer's Name:
Water Tight Technologies, LLC

Chemical Family:
Mixture

Manufacturer's Address:
P.O. Box 899 Payson, AZ  85547

Chemical Formula:
Not Established

NFPA Acute Hazard Rating: 
Health 1, Flammability 1, Reactivity 0
HMIS Acute Hazard Rating:
Health 0, Flammability 1, Reactivity 0

SECTION 2 - CHEMICAL COMPOSITION

Hazardous Components (chemical names)

Case No.

% (by wt)

Exposure Limits:

Nonhazardous as per 29 CFR 1910. 1200

None

None

100

Nonhazardous as per 29 CFR 1910. 1200

SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS

Appearance/Odor:
Black, solid with no odor

Physical State:
Solid

Solubility in Water:
N/A

Boiling Point:
N/A

Specific Gravity (water=1):
Varies

Melting Point:
Not Established

Vapor Pressure:
N/A

Vapor Density (Air=1):
Not Established

Freezing Point:
Not Established

Percent Volatiles:
Unknown

Evaporation Rate:
N/A

Reactivity in Water:
Not Established

pH (Full Strength):
Not Established

pH (Recommended Dilution):
Not Established

Refraction Index:
N/A

SECTION 4 - FIRE & EXPLOSION HAZARD DATA

Flash Point:
> 200° C

Explosive Limits:
N/A

Extinguishing Media:
Dry chemical, carbon dioxide, water fog or foam. Water should be used to keep fire exposed containers cool.

Fire Fighting Procedures:
Treat as Class “B” Fire.
Use water spray to cool adjacent surfaces and fire exposed containers. Protect against inhalation of combustion products.

Firefighters should wear full protective clothing including self-contained breathing apparatus to prevent inhalation of smoke and decomposition products. Toxic fumes and vapors may be involved.

Hazardous Decomposition Products:
May form toxic materials: Carbon Dioxide, Carbon Monoxide, Oxide of nitrogen, Sulfur Dioxide, and acrid smoke and irritating fumes.

Special Fire & Explosion Hazards:
None Known

Method Used:
Not Established

Special Fire & Explosion Hazards:
Not Established

SECTION 5 - HEALTH HAZARD DATA

Permissible Exposure Limit:
Not Established

Signs and Symptoms of Exposure:

Treat as a foreign object in eye. Eye contact may cause severe eye irritation, redness, tearing and blurred vision. Flush with large amounts of water. Get medical attention if irritation of eyes or skin persists.  

Effects of Overexposure:
Not Established

Acute:
Due to physical nature of this product, eye contact, ingestion and inhalation are unlikely.

Chemical Listed as a Carcinogen (or Potential Carcinogen):

National Toxicology Program:  NO
L.A.R.C. Monographs: NO
OSHA: NO

Chronic:
No known adverse effects.

Emergency & First Aid Procedures:
Eye Contact: 
Contact with eyes may result in tearing, irritation, redness and swelling. Hold eyes open and flush immediately with a gentle stream of water for at least 15 minutes, preferable at an eyewash fountain.
Skin Contact:
Thoroughly wash  affected area with soap and water.
Inhalation:
Due to the physical nature of this product, inhalation is unlikely.
Ingestion:
Due to the physical nature of this product, ingestion is unlikely.
Primary Route of Entry:

Skin contact.

SECTION 6 - REACTIVITY DATA

Stability:
Stable

Incompatibility (Materials to Avoid):
Strong oxidizers, acids, bases.

Hazardous Decomposition Products:
Carbon dioxide and carbon monoxide, oxides of nitrogen, sulfur dioxide, and partially burned carbon.

Hazardous Polymerization:
N/A

Conditions to Avoid:
Open flames, sparks, and closed areas that restrict adequate ventilation.  Exposure to temperatures in excess of 130° F

SECTION 7 - SPILL OR LEAK PROCEDURES

Steps to be taken in case material is released or spilled:

Small spill:
Shovel or scoop into a sealable container for disposal.

Large Spill:
Same as small spill.

Waste Disposal Method (including Clean-up Media):
Dispose in a landfill in accordance with local, state and federal regulations.

SECTION 8 - SPECIAL PROTECTION

Storage/Handling:
Keep away from heat, sparks, and open flames. Store in a cool, dry area.

Precautionary Labeling:
Not Established

Other Precautions:
Not Established

SECTION 9 - SPECIAL PROTECTION

Respiratory Protection:
Not required under normal conditions of use.

Eye Protection:
Impervious  glasses recommended

Protective Gloves:
Not required under normal conditions of use.

Other Protective equipment:
Under normal application conditions, protective glasses, gloves, and clothing are adequate.

Ventilation:
Provide adequate ventilation to maintain airborne concentrations below OSHA PELs.

SECTION 10 - TRANSPORTATION

Regulatory Agency:
Not Regulated

Identification Number:
Not Applicable

Proper Shipping Name:
Not Applicable

Labels Required:
Not Applicable

Hazard Classification:
Not Applicable

Other Requirements:
Not Applicable

SECTION 11 – MISCELLANEOUS INFORMATION

Additional Comments:
This product is considered to be a finished article as per 29 CFR 1910.1200 © and is therefore exempt from the requirements of the Hazard Communication standard.

Date of Previous MSDS:
September 26, 1990

Changes Since Previous MSDS:
Comment change in sections:  1 thru 9
Add sections: 10,11

Telephone Number for Additional Information:
(574) 293-9096

DISCLAIMER

The information contained herein is based on data considered accurate which has been obtained from other companies and organizations. However, no warranty or representation is expressed or implied that the information is accurate, complete, or representative. Water Tight Technologies, LLC. assumes no responsibility for injury to the buyer, the buyer’s employees, or any third persons if reasonable safety procedures are not followed.