See Printer-Friendly Version
Download PDF File

SECTION 1 - PRODUCT IDENTIFICATION

Product Name:
Pourable Sealer Part B

24-Hour Emergency Telephone Number:
800-424-9300 CHEMTREC

Chemical Name/Synonyms:
Polymethylene Polyisocyanate

Manufacturer's Name:
Water Tight Technologies, LLC

Chemical Family:
Polyisocyanate (Polymeric MDI)

Manufacturer's Address:
P.O. Box 899 Payson, AZ  85547

Chemical Formula:
Not Established

NFPA Acute Hazard Rating:  
Health 1, Flammability 1, Reactivity 0
HMIS Acute Hazard Rating:
Health 1, Flammability 1, Reactivity 0

SECTION 2 - CHEMICAL COMPOSITION

Hazardous Components (chemical names)

Common Name

Case No.

 % (by weight)

Exposure Limits:

Methylenediphenyl Diisocyanate

MDI

101-68-8

41.7

OSHA  CEIL 0.02 PPM
TLV 0.005 PPM

Carbon Black

Channel Black

1333-86-4

16.6

PEL 3.5 mg/M³
TLV 3.5 mg/M³

MDI Oligomers

None

9016-87-9

41.7

Not Established

SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS

Appearance/Odor:
Light black, viscous liquid, mild odor.

Physical State:
Liquid

Solubility in Water:
Reacts with water

Boiling Point:
341°

Specific Gravity (H₂O=1):
1.474(Water=1)

Melting Point:
Not Applicable

Vapor Pressure:
<0.0001 mm Hg @ 20° C

Vapor Density (Air=1):
8.6

Freezing Point:
Not Established

Percent Volatiles:
Unknown

Evaporation Rate:
Unknown

Reactivity in Water:
Reacts with water.

pH (Full Strength):
Unknown

pH (Recommended Dilution):
Unknown

Ignition  Temperature:
400°C (725°F)

SECTION 4 - FIRE & EXPLOSION HAZARD DATA

Flash Point:
111°C (232°F)

Flammable Limits (in air):
LEL: Unknown  UEL: Unknown

Extinguishing Media:
Water fog, foam, CO2, or dry chemical.

Fire Fighting Procedures:
Use water spray to cool adjacent surfaces and fire exposed containers. Protect against inhalation of combustion products.

Firefighters should wear full protective clothing including self-contained breathing apparatus to prevent inhalation of smoke and decomposition products. Toxic fumes and vapors may be involved.

Hazardous Decomposition Products:
No Decomposition if used according to specifications

Special Fire & Explosion Hazards:
Keep work areas free from open flames, sparks, hot metal surfaces and other sources of ignition. Ground objects prone to static electricity. Heat from fire can generate flammable vapors. Avoid contamination with moisture, alcohol, ammonia, amines, and alkalies that react with Isocyanates. Will react vigorously with water.

Method Used:
PMCC

Auto-Ignition Temperature:
Product is not self-igniting.

SECTION 5 - HEALTH HAZARD DATA

Permissible Exposure Limit:
Not Established

Signs and Symptoms of Exposure:
Eye contact may result in conjunctival irritation and mild corneal opacity. Skin contact may result in irritative or allergic dermatitis. Inhalation of vapors may cause irritation of the mucous membrane of the nose, throat, or trachea, shortness of breath, chest discomfort, difficulty breathing and reduced pulmonary function. Exposure of fumes above the PEL may result in eye irritation, headache, chemical bronchitis, asthma-like symptoms or pulmonary edema. Isocyanates have also been reported to cause hypersensitivity pneumonitis, characterized by flu-like symptoms, the onset of which may be delayed. Neurologic effects after exposure to high levels of Diisocyanates can include euphoria, anxiety, personality changes, memory defictits, depression or paranoia. Aerosol MDI LC50: 490 mg/M³, rat: MDI LD50: > 10,000 mg/kg, rat.

Effects of Overexposure:
Medical Conditions Aggravated by Exposure:
May cause minor temporary eye or respiratory system irritation. May cause skin irritation when contact is made with skin area that is cut or scratched.

Acute:
Overexposure to fumes may result in shortness of breath difficulty breathing. Long term exposure may result in permanent lung damage.

Chemical Listed as a Carcinogen (or Potential Carcinogen):
Carbon black is an IARC class 2B Carcinogen and is possibly carcinogenic to humans: limited evidence in humans in the absence of sufficient evidence in experimental animals.

Chronic:
Acute or chronic overexposure to Isocyanates may cause sensitization resulting in allergic symptoms of the lower respiratory tract, including shortness of breath and difficulty in breathing. Asthma caused by Isocyanates including MDI, may persist after removal from exposure and may be irreversible. Long term exposure to Isocyanates has been reported to cause lung damage, including reduces lung function, which may be permanent.

Emergency & First Aid Procedures:
Eye Contact: 
Flush with gentle stream of water for a minimum of 15 minutes and contact a physician.
Skin Contact:
Clean with rubbing alcohol, followed by soap and water. When skin contact is made with a mixture of Parts A & B, the product must be removed immediately using Acetone.
Inhalation:
Remove to fresh air. Administer oxygen or artificial respiration, if necessary. Call physician.
Ingestion:
Consult a Physician. DO NOT INDUCE VOMITING. Inform the physician of the nature of the product.
Primary Route of Entry:
Inhalation, Skin or eye contact, and Ingestion.

SECTION 6 - REACTIVITY DATA

Stability:
Stable at ambient temperatures and pressures.

Incompatibility:
Strong oxidizers, acids, bases, and moisture.

Hazardous Decomposition Products:
Toxic gases or vapors, such as oxides of carbon and nitrogen along with traces of butadiene may be released during a fire.

Hazardous Polymerization:
Will not occur.

Conditions to Avoid:
Strong oxidizers, moisture, acid and bases.  Contact with phosphorus may produce by-products.

SECTION 7 - SPILL OR LEAK PROCEDURES

Steps to be taken in case material is released or spilled:
Small spill:
Wear protective equipment including eye protection, rubber gloves, rubber boots, and self-contained breathing apparatus in the pressure mode, or an air supplied respirator. Absorb using inert material. Use non-sparking tools. Transfer into secure DOT approved waste containers for proper disposal. Use personal protective equipment as outlined below.

Large Spill:
Same as small spill.

Waste Disposal Method:
Dispose of according to local, state, and federal regulations.

SECTION 8 - SPECIAL PROTECTION

Respiratory Protection:
Use NIOSH-Certified respiratory protection for organic vapor if necessary.

Eye Protection:
The use of safety glasses with side shields are recommended when handling this product.

Protective Gloves:
The use of Nitrile rubber gloves are recommended to prevent skin contact.

Other Protective Equipment:
Under normal application conditions, protective glasses, gloves, and clothing are adequate. Clean and dispose of contaminated clothing after each use.

Ventilation:
Use in a well ventilated area.

SECTION 9 - SPECIAL PRECAUTIONS OR OTHER COMMENTS

Storage/Handling:
Store in cool, dry, well ventilated facility.  Store and use away from all sources of direct heat and ignition. Keep containers closed when not in use.

Other Precautions:
Provide adequate ventilation and avoid prolonged or repeated contact with the skin. Wash with soap and water immediately after contact.

Work/Hygienic Practices:
Maintain good personal hygiene practices. Wash contaminated clothing before reuse. Do not eat, drink, or smoke in work areas. Wash exposed skin before eating, drinking, smoking, or applying cosmetics.

SECTION 10 - TRANSPORTATION

Regulatory Agency:
Not Regulated

Identification Number:
Not Applicable

Proper Shipping Name:
Not Applicable

Labels Required:
Not Applicable

Hazard Classification:
Not Applicable

Other Requirements:
Not Applicable

Packing Group:
Not Applicable

SECTION 11 – MISCELLANEOUS INFORMATION

Additional Comments:
None.

Date of Previous MSDS:
August 2000

Changes Since Previous MSDS:
Comment change in sections:  1 thru 9
Add sections: 10,11

Telephone Number for Additional Information:
(574) 293-9096

DISCLAIMER

The information contained herein is based on data considered accurate which has been obtained from other companies and organizations. However, no warranty or representation is expressed or implied that the information is accurate, complete, or representative. Water Tight Technologies, LLC. assumes no responsibility for injury to the buyer, the buyer’s employees, or any third persons if reasonable safety procedures are not followed.