MATERIAL SAFETY DATA SHEET
May be used to comply with OSHA's Hazard Communication Standard, 29CFR 1910.1200.
SECTION 1 - PRODUCT IDENTIFICATION |
Product Name:
Pipe Boot |
24-Hour Emergency Telephone Number:
800-424-9300 CHEMTREC |
Chemical Name/Synonyms:
EPDM Pipe Flashing, 1" to 6" ID |
Manufacturer's Name:
Water Tight Technologies, LLC |
Chemical Family:
Mixture |
Manufacturer's Address:
P.O. Box 899
Payson, AZ 85547 |
Chemical Formula:
N/A |
NFPA Acute Hazard Rating:
Health 1, Flammability 1, Reactivity 0
HMIS Acute Hazard Rating:
Health 0, Flammability 1, Reactivity 0 |
SECTION 2 - CHEMICAL COMPOSITION |
Hazardous Components (chemical names) |
Case No.
None |
% wt or % vol
100 |
OSHA STEL |
OSHA PEL |
ACGIH TLV |
This material is a fully vulcanized rubber sheet which falls under the article exemption provided for under OSHA 1910.1200.
There are no recognized hazards associated with normal use of this product. |
SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS |
Appearance/Odor:
Black, conical shape with slight rubber odor. |
Physical State:
Solid |
Solubility in Water:
Insoluble |
Boiling Point:
None |
Specific Gravity (H2O=1):
1.135 |
Melting Point:
N/A |
Vapor Pressure:
N/A |
Vapor Density (Air=1):
N/A |
Freezing Point:
N/A |
Percent Volatiles:
0.7% maximum |
Evaporation Rate:
N/A |
Reactivity in Water:
N/A |
pH (Full Strength):
N/A |
pH (Recommended Dilution):
N/A |
Refraction Index:
N/A |
SECTION 4 - FIRE & EXPLOSION HAZARD DATA |
Flash Point:
Not Applicable |
Flammable Limits (in air):
LEL: None UEL: None |
Extinguishing Media:
Carbon Dioxide, foam, sand/earth. Dry chemical and foam can also be used. |
Fire Fighting Procedures:
Treat as Class “B” fire. Limit firefighting to those trained to do so. Firefighters should wear full protective clothing including self-contained breathing apparatus to prevent inhalation of smoke and decomposition products. Toxic fumes and vapors may be involved. |
Hazardous Decomposition Products:
Carbon Dioxide, Carbon Monoxide, Oxides of Nitrogen, Sulfur Dioxide, and partially burned Carbon. |
Special Fire & Explosion Hazards:
Oil “bleeds” from material when burning. |
Method Used:
Not Established |
Auto-Ignition Temperature:
Unknown |
SECTION 5 - HEALTH HAZARD DATA |
Permissible Exposure Limit:
Not Established |
Signs and Symptoms of Exposure:
Eye contact: Can cause irritation, redness, tearing, blurred vision. |
Effects of Overexposure:
Medical Conditions Aggravated By Exposure
Toxic fumes may be released during fire. Exposure to fumes may aggravate pre-existing eye, lung, and skin conditions. |
Acute:
Not Established |
Carcinogenicity:
IARC, NTP, and OSHA do not list this product as a carcinogen. |
Chronic:
This product contains Carbon Black, category 2B (known animal carcinogen, possible human carcinogen). |
Emergency & First Aid Procedures:
Eye Contact:
Treat as object in eye. Flush with clean water. Contact Physician if irritation persists.
Skin Contact:
Physical form should preclude any harmful effect from contact.
Inhalation:
N/A
Ingestion:
Consult a Physician
Primary Route of Entry:
None |
SECTION 6 - REACTIVITY DATA |
Stability:
Stable |
Incompatibility:
None Known |
Hazardous Decomposition Products:
Toxic gases or vapors, such as carbon monoxide, carbon dioxide, or oxides of nitrogen may be released during a fire. |
Hazardous Polymerization:
Will not occur. |
Conditions to Avoid:
Open flames, heat and sparks. |
|
SECTION 7 - SPILL OR LEAK PROCEDURES |
Steps to be taken in case material is released or spilled:
Small spill:
Scoop or shovel material into sealed containers.
Large Spill:
Same as small spill.
Waste Disposal Method:
Dispose of in accordance with local, state, and federal regulations. |
SECTION 8 - SPECIAL PROTECTION |
|
Respiratory Protection:
N/A |
Eye Protection:
Safety glasses recommended. |
Protective Gloves:
Gloves are recommended to prevent skin contact. |
Other Protective Equipment:
None required under normal installation conditions. |
Ventilation:
Store and use in well ventilated areas. |
SECTION 9 - SPECIAL PRECAUTIONS OR OTHER COMMENTS |
Storage/Handling:
Store in cool, dry, well ventilated facility. |
Other Precautions:
Store material in original shipping packaging. |
Work/Hygienic Practices:
Maintain good personal hygiene practices. Wash contaminated clothing before reuse. Do not eat, drink, or smoke in work areas. Wash exposed skin before eating, drinking, smoking, or applying cosmetics. |
SECTION 10 - TRANSPORTATION |
Regulatory Agency:
Not Regulated |
Identification Number:
Not Applicable |
Proper Shipping Name:
Not Applicable |
Labels Required:
Not Applicable |
Hazard Classification:
Not Applicable |
Other Requirements:
Not Applicable |
SECTION 11 - MISCELLANEOUS INFORMATION |
Additional Comments:
This product is considered to be a finished article as per 29 CFR 1910.1200 © and is therefore exempt from the requirements of the Hazard Communication standard. |
Date of Previous MSDS:
November 1992 |
Changes Since Previous MSDS:
Comment change in sections: 1 thru 9
Add sections: 10,11 |
Telephone Number for Additional Information:
(574) 293-9096 |
DISCLAIMER |
The information contained herein is based on data considered accurate which has been obtained from other companies and organizations. However, no warranty or representation is expressed or implied that the information is accurate, complete, or representative. Water Tight Technologies, LLC assumes no responsibility for injury to the buyer, the buyer’s employees, or any third persons if reasonable safety procedures are not followed. |
Pipe Boot
March 28, 2007 |